LAUNCH X431 CRP919X Scan Tool + i-TPMS
Where we recommend it
If TPMS sensor reprogramming is the job, this pairs the CRP919X's full bidirectional scanner with the i-TPMS handheld so you handle both the module work and the sensor activation in one setup.
The CRP919X paired with the i-TPMS handheld is a focused setup for a classic car that has an OBD2 port, and it covers the diagnostic work most owners actually run into at the bench. Bidirectional control lets you send test commands to modules and relearn adaptive data after you swap a part, not just pull a code and guess at the cause. ECU coding is built in, so if you replace a component and the car needs to reidentify it, you handle that without a dealer. It reads and clears across every module the car carries, supports 160-plus brands from 1996 forward, and the CAN FD and DoIP protocols keep it current as you work through a build. The i-TPMS is a small dedicated tool for activating and programming tire pressure sensors, which is useful if your car runs a TPMS system or you are fitting one. Two years of software updates are included, and the 6300mAh battery means you are not hunting for a power cord in the shop. Where it falls short is the same limit every OBD2 tool carries: if your car predates 1996 or never had an OBD2 port, this will not talk to it, and you are still pulling a wiring diagram and a multimeter for the harness work that eats most of a restoration. The i-TPMS is single-purpose. If your project does not involve tire pressure sensors, it is an extra item on the bench you will not reach for. For the owner working on a late-90s or 2000s classic who wants to handle diagnostics, relearnings, and TPMS at the bench without adding the larger accessory bundles, this pairing matches the job.
Estimated retail value
$719.00
As of Oct 30, 2026
About it
LAUNCH's CRP919X is an all-system bidirectional OBD2 scan tool: it reads and clears codes in every module the car carries, sends test commands to them and does ECU coding, with TPMS and battery service built in. It supports CAN FD and DoIP, connects by Bluetooth or USB cable, and includes two years of free software updates. This kit adds LAUNCH's i-TPMS handheld tool for activating and programming tire pressure sensors.
Specifications
- Brand
- Launch
- Model number
- CRP919X
- Connectivity Technology
- Bluetooth, USB, 2.4G & 5GHz Dual WiFi
- Power Source
- 6300mAh rechargeable battery
What it does
Bidirectional diagnostics
Performs bidirectional control to acquire dealer-level skills at no additional cost.
Full system diagnostics
Accesses and diagnoses all available systems for 160+ brands covering 99% of vehicles from 1996-2026.
ECU coding
Reidentifies adaptive data for certain components after repair or replacement via advanced ECU code.
CAN FD and DoIP support
Supports CAN FD and DoIP new vehicle protocols for 5x faster data transmission.
TPMS diagnostics
Includes built-in TPMS (i-TPMS) tire pressure monitoring system diagnostics.
Battery testing
Performs battery voltage testing as part of its diagnostic functions.
Wireless diagnostics
Supports both wireless Bluetooth and wired USB connection for vehicle diagnostics via DBSCar VII VCI connector.
Free software updates (2 years)
Includes 2 full years of free official software updates from Launch.
Live data export as CSV
Displays 8 PIDs and supports exporting live data stream as CSV file to share with a PC.
Reset functions
Provides 35+ reset functions to adapt to increasing diagnostic problems and repair needs.
VAG guided functions
Provides maintenance guides to complete matching, calibration, and basic settings for VAG vehicles.
Remote assistance
Uses Team Viewer to provide remote assistance for diagnosis support.
Auto VIN and Smart Scan
Features Super Auto VIN and Smart Scan 2.0 for quick vehicle identification and diagnosis.
Health report generation
Generates one-click auto health reports for vehicle condition assessment.
Firmware repair
Performs firmware repair on vehicle control modules.
DTC lookup and code search
Provides DTC lookup and code search functionality for diagnostic code identification.
Personalization
Activates high-end features to boost vehicle performance.
Also in LAUNCH CRP919X kits
1
LAUNCH X431 CRP919X Scan Tool
If your job is to read, clear, command, and code every module the car carries, grab this one: it handles the full diagnostic conversation over Bluetooth or a cable, with TPMS and battery service already built in.
3
LAUNCH X431 CRP919X Scan Tool + CRP123X
For the owner who wants a quick grab-and-go reader in the glovebox for engine, transmission, ABS, and airbag codes while the CRP919X does the deep all-system work, this kit covers both jobs.
4
LAUNCH X431 CRP919X Scan Tool + VSP600, BST360 and i-TPMS
If you want the scan tool, the inspection camera, the battery tester, and the TPMS tool in one box so a full diagnosis doesn't mean a second trip to the parts counter, this is the kit.
Where these picks come from: LAUNCH US